Common Questions for Beginners Exploring Nail Curing Lamps!
Get to know the nail art light therapy lamp:
(1) UV nail lamp：I.e. ultraviolet light.The light emitted by UV lamps belongs to the UVA band, with wavelengths ranging from 300 to 410 nm, which is harmful to the skin.
(2) LED Nail Lamp：LED (Light Emitting Diode). Harmful UV content is less, safer for the skin.The UV wavelength produced by LED lights is relatively concentrated, generally 390~410nm.
In the past, phototherapy adhesive are only UV lamp curing, nowadays there are some brands of products only UV lamp can shine dry, so it is necessary to keep the lamp machine with UV function, and not recommended to use simple LED function lamp machine.
1、How to deal with the unevenness of the nail surface?
Problem Analysis：①、Uneven application of phototherapy gel
②、 Rush to shine the light before the phototherapy gel has reached a natural uniform state.
Therapeutic Approach：First, wipe the nail surface with 95% alcohol, then polish the nail surface with an abrasive strip to sweep away the powder before applying the phototherapy gel. Before shining the light, pay attention to observe whether the phototherapy gel is even.
2、After shining the light for a long time, why is the surface layer of the phototherapy has become hard but the inside is still soft?
Problem Analysis：The phototherapy adhesive is applied too thickly, resulting in the UV light not penetrating the top layer and the inner layer not hardening.
Therapeutic Approach：Wipe off the floating glue with 95% alcohol, or just use a sander to remove the photofinish glue and reapply a thinner layer of glue.
3、What should I do if a large amount of photofinish gel is wiped off when applying nails with 95% alcohol or gel water?
Problem Analysis：①、The phototherapy gel is applied too thinly, or the power of the phototherapy lamp is low and the light does not dry.
②、 LED/UV lamps with quality problems are used.
Therapeutic Approach：First, wipe the nail surface with 95% alcohol, then use a sponge file to gently polish the surface to make it flat. Sweep away the powder and then apply the phototherapy gel. Do not apply the gel too thinly, but evenly. Choose the BQAN LED/UV lamp specified or recognized by the brand of the phototherapy gel used, and replace the lamp regularly.
4、How to deal with too thick nail edge?
Problem Analysis：①、Too much or too little force is used when applying phototherapy gel.
②、Improper handling angle of the brush when applying phototherapy gel
③ 、Excessive glue is used for hemming.
Therapeutic Approach：First, wipe the nail surface with 95% alcohol, then polish the surface with an abrasive strip to sweep away the powder before applying the polish gel. When applying the gel, keep in mind that the brush should be placed lightly and flatly, and applied from the back edge of the nail to the front edge of the nail.
5、Why are there pit lines?
Problem Analysis：Color or light therapy adhesive is applied too thinly or unevenly.
Therapeutic Approach：Wipe off the floating gel with 95% alcohol, then gently sand the nail surface with an abrasive strip to sweep away the powder before applying the photofinish gel.
Note: Do not apply tinted gel or phototherapy gel too thinly!
#Dry nails, #lamp machine, #led nail lamp, #led uv lamp, #nail lamp, #nail tools, #UV Gel Brush, #uv gel nail, #UV lamp, #uv nial lamp