Newbie Nail Art Step by Step

Newbie Nail Art Step by Step

Step 1: Nail Shaping

Step 2: Remove Dead Skin

Step 3: Polish the nail surface

Step 4: Clean the nail surface

Step 5: Apply primer and edge banding

Step 6: Apply Reinforcement Adhesive

Step 7: Apply color glue and wrap the edges

Step 8: Apply sealer and edge banding

Step 1: Nail Shaping

Handheld rubbing strip of one-third of the nails to repair the shape, repair a good-looking shape of the nail repair is the beginning of all manicure operations, nail repair good-looking, after the color will have a different effect!

Step 2: Remove Dead Skin

First, apply a layer of softener on the dead skin at the root of the nail, then gently massage a little with a steel push from top to bottom to slowly guide the dead skin to the root of the nail then find the support point, and then use the dead skin scissors to cut off the upturned dead skin and barbs.

(Note: novice operators do not over-trimming Oh)

Step 3: Polish the nail surface

In the order of side-front-side, buff the nail with the coarse side of the sponge, and then buff the nail with the fine side.

(Note: the root and sides of the nail should also be sanded)

Step 4: Clean the nail surface

Use a dusting brush to clean fine debris from nail surfaces and grooves, then clean nail surfaces with 75°degree alcohol.

(Note: Be sure to scrub the nail surface clean of grease)

Step 5: Apply primer and edge banding

Take a small amount of glue, first backhand on the edge of the nail on the bottom of the glue, wrap the edge, and then on the nail surface coated with the bottom of the glue, with a brush to repeat several times to brush coated on the nail surface, so that the bottom of the glue and the nail surface more serviceable, shine the light for 30s can be.

Step 6: Apply Reinforcement Adhesive

Take a small amount of glue, apply the reinforcing glue on the nail surface, use the brush to repeat several times to brush on the nail surface to make the nail surface more shaped, shine the light for 30s.

Step 7: Apply color glue and wrap the edges

Operation with the same bottom glue consistent, note: only need to wrap the edge of the first coat of color glue, apply the second color glue do not have to wrap the edge; color glue is generally coated 2 times, the first coated with a good light for 60 seconds, and then coated with the second 60 seconds.

Step 8: Apply sealer and edge banding

As above, wrap the front edge of the nail with the sealer on the back hand, then apply the sealer to the nail surface and leave to dry.